HD HPE PRO
(The disk disassembling equipment built to handle Head Stack and DSM issues.)
According to our pioneer 3+1 Data Recovery process, in case the drive corruption is not caused by firmware but head stack or drive spin motor, you need to perform the extra "+1" stage by using HD HPE PRO.
Besides firmware problem and the well-known file system problem, as a data recovery professional, you must have experiences that drives click and drive spin motor got stuck or burnt. For few of you, these kinds of problems can be fixed by replacing the damaged parts manually, but for most of the non-experts who want to lay their hands on this bite of cake, it is better if they work in a stable environment with assistance of industrial designed utilities to prevent further damages or misalign because of incorrect operations to maintain the user data intact.
SalvationDATA HD HPE PRO will be the unarguable and the only equipment you need!
Highlights of HD HPE PRO
- Universal-fit workbench assures you to operate on your HD on a relatively stable table, making your job easier and more reliable.
- Pioneer platter exchanger maintains the original cylinder status by removing and placing each platter of the multiple platters together, so that allows you to change multiple platters without moving the platters out of alignment with each other which otherwise will result in data corruption.
- Special Actuator Remover assures you to perform easy operation (removal, installation) on the upper magnet of the actuator which is very hard to be removed and put back because of its strong magnetism and it’s sensitive and embarrassed position (being very close to both the Head Stack and Media Platter), in case it slips out and touch either of its fragile neighbors during the operations — the consequences will be a disaster.
|