SalvationDATA

[Marcel]

I have a Western Digital Blue Scorpio WD2500BEVT-00ZCT0 2.5" SATA and I have it installed in an external enclosure. By a mistake I pass a low-level format with the HDD-Low-Level-Format-Tool and now my WD appears as a Samsung hard disk. I tried to pass WD Data Lifeguard Diagnostic for Windows as described in this post but after 5 hours my WD still shows as Samsung.
If someone could give me advice or recommend a tool that could correct it I would greatly appreciate this.

PD: Sorry by my English

[SalvationDATA]

hello

I'm afraid the parameter module has been changed by the software.

So it's suggested that you check the drive with HD doctor for WD and see what happens with this module.

Then you can fix it by upload a compatible one.