<?xml version="1.0" encoding="iso-8859-1" standalone="yes" ?>
<rss version="2.0">
<channel>
<title>Data Recovery &amp; HDD Repair FAQS - Open questions</title>
<description>SalvationDATA data recovery tools,hdd repair tools faqs.</description>
<link>http://www.salvationdata.com/faq</link>
	<item>
		<title><![CDATA[WD 40GB 400EB when i click on ZERO FILL ... (sadiqahmed)]]></title>
		<description><![CDATA[WD 40GB 400EB when i click on ZERO FILL drive restart automatically when i start scan for bad sector same problem.what is the solution for this kind of drives?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_1</link>
		<pubDate>Mon, 16 Mar 2009 09:36:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I have a dead WD HD SATA, when I ... (Mosa J. Al Marzouq)]]></title>
		<description><![CDATA[I have a dead WD HD SATA, when I plug it into power it starts with little clicking sound and then shutdown. Is this a physical problem? If so how much is HD HPE PRO costs? and how to buy it online?

Thank you,
]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_2</link>
		<pubDate>Wed, 25 Mar 2009 18:20:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hello, I have a problem with HD322HJ, drive is ... (Dawid)]]></title>
		<description><![CDATA[Hello,

I have a problem with HD322HJ, drive is fast clicking. raport from terminal:

--- cut ---
PSL

++ SU
MaxPhyHead = 0006
RPM at Handoff: 018A
tSHOS - Released on 2008/04/18 15:1
2 by sec
DRAM=16MB SoC=26A3
SHOS-(1AC12a9M.a11)
L=00000000,00000000
KeepSpinOn!
RV Circuit Enabled
Temp : 25 degC
SpinOk
mServoStatus1 00000003
ADC Time Out!
ADC Time Out!
...
ADC Time Out!
ADC Time Out!
PSL

++ SU
MaxPhyHead = 0006
RPM at Handoff: 0184
tSHOS - Released on 2008/04/18 15:1
2 by sec
DRAM=16MB SoC=26A3
SHOS-(1AC12a9M.a11)
L=00000000,00000000
KeepSpinOn!
RV Circuit Enabled
Temp : 24 degC
SpinOk
mServoStatus1 00000003
ADC Time Out!
ADC Time Out!
...
ADC Time Out!
ADC Time Out!
UF 3 1stGrayErr
Vel Parking!
PK_3 C: 0 H:0

++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
 UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1

++ SU
MaxPhyHead = 0002
RPM at Handoff: 019F
KeepSpinOn!
RV Circuit Enabled
ADC Time Out!
ADC Time Out!
...
ADC Time Out!
ADC Time Out!
Temp : 24 degC
 Accel fails FaultCheck: mSpinAccelCheck1 = 0, mSpinAccelCheck2 =
0, mSpinRPM = 341
]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_3</link>
		<pubDate>Sun, 29 Mar 2009 18:24:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I just received my equipment. I am not getting ... (Ben Olvera)]]></title>
		<description><![CDATA[I just received my equipment.  I am not getting any power to the Data Compass Controller.  When I plug in the USB, that lites comes on solid green.  The power light never comes on.  When I click the "DC Controller Launcher" it tells me " No DC Device Found!". Please advise. thanks, Ben]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_4</link>
		<pubDate>Tue, 31 Mar 2009 00:03:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hello. I recently reinstalled Salvation HD Doctor for IBM ... (Dan Dinolfo)]]></title>
		<description><![CDATA[Hello.  I recently reinstalled Salvation HD Doctor for IBM Hitachi on my computer version 1.46, and every time I start it, it detects an updated version of the software.  However, it cannot download the software and returns an error saying "Updating HT2.00setup.exe Failed".  How do I get the latest version?  I know that I had a higher version on my old computer, unfortunately the hard disk is no more.  :-(]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_5</link>
		<pubDate>Wed, 01 Apr 2009 20:55:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[how much data compass send to king dom saudia ... (sameh)]]></title>
		<description><![CDATA[how much data compass send to king dom saudia arbic dhl?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_6</link>
		<pubDate>Tue, 14 Apr 2009 15:02:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[i scaned modules of wd800bb-00jhc0 i found error in ... (medo)]]></title>
		<description><![CDATA[i scaned modules of wd800bb-00jhc0
i found error in translator and smart modules
i tried to write it many times but no result it still bads so when i changed its place in service area module directory become failer
now i cant fix it an i dont know what is the solution]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_7</link>
		<pubDate>Tue, 14 Apr 2009 20:30:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I can not connect to the PCB Board in ... (david)]]></title>
		<description><![CDATA[I can not connect to the PCB Board in CMD Mode (no answer after 'CTRL+Z'; I think the transmitter is not working properly. I have only the red lamp, if I touch one of the connection, the rx yellow lamp stays on.
]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_8</link>
		<pubDate>Wed, 15 Apr 2009 11:19:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi Salvationdata! The hdd led of my pc flashes ... (winyo2)]]></title>
		<description><![CDATA[Hi Salvationdata!

The hdd led of my pc flashes three times short 
continouisly for some minutes in safe mode. What does it mean? Maxtor 6e040l0 NAR61590

Thanks in advance. 
 ]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_9</link>
		<pubDate>Wed, 22 Apr 2009 11:45:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi Roy! Thanks for your answer. Sorry for my ... (winyo2)]]></title>
		<description><![CDATA[Hi Roy!

Thanks for your answer. Sorry for my english.
I jumpered the hdd into safe mode.(for selfscan). ( _::) 
But something wrong happened I think. 
Now after boot the hdd led flashes cca. 3 times during 2 second, wait a little  and this repeat for cca. 6-8 minutes. Maybe this is an error or waiting state? 
]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_10</link>
		<pubDate>Wed, 22 Apr 2009 14:57:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[each time after self scaning hdd become corrept and ... (naveed)]]></title>
		<description><![CDATA[each time after self scaning hdd become corrept
and give error 
plez help me and provide me some papers about f/w errors and modules etc i have read user manual but no help 
thanx naveed]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_11</link>
		<pubDate>Sat, 25 Apr 2009 16:11:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Is there a down-loadable version of the owners manual ... (Will McClaflin)]]></title>
		<description><![CDATA[Is there a down-loadable version of the owners manual somewhere on this site?


thanks James]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_12</link>
		<pubDate>Sat, 02 May 2009 05:37:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[i have a HDD that can be dectected & ... (Kamal Kant)]]></title>
		<description><![CDATA[i have a HDD that can be dectected & show capicity of HDD.But any opertaing system like window 98 or xp can't be installed.when it is scan by scandisk that show bad sector in zero sector.i think it's zero sector which store HDD information is corrupted.what can i do with the hardisk.]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_13</link>
		<pubDate>Thu, 07 May 2009 15:11:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Where can I get a list of what kind ... (Robert Zandona)]]></title>
		<description><![CDATA[Where can I get a list of what kind of seagate drive I have? The manual did not specify how to detect what kind of drive it is. How do I know if it is a U6, U10 etc.

The manual is not clear exactly how to connect the JP4 jumper for a notebook SATA drive. Do you have a picture showing exactly how to connect a Seagate notebook SATA drive?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_14</link>
		<pubDate>Wed, 20 May 2009 05:51:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[My HDD (Seagate 500GB SATA) is not detect. If ... (Aung San Minn)]]></title>
		<description><![CDATA[My HDD (Seagate 500GB SATA) is not detect.
If this HDD is connected, others HDDs are not detect.I want to get my data from it.My data is very important.How to solve it?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_15</link>
		<pubDate>Tue, 26 May 2009 05:32:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[My Hdd is not detect.If it is connected, other ... (Aung San Minn)]]></title>
		<description><![CDATA[My Hdd is not detect.If it is connected, other HDDs not detected.I want to get my data from it. My data is very important for me.My Hdd is 500GB, sata.Please replay me how to solve it.]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_16</link>
		<pubDate>Sun, 31 May 2009 11:11:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I have Seagate Ultra ATA U series 9 160Gbytes ... (smath)]]></title>
		<description><![CDATA[I have Seagate Ultra ATA U series 9 160Gbytes It was working properly but Once it corrupts my windows XP and when I tried to repair it I found it was showing only two partitins C: and D: (40 gbytes) and hide all other partitions. I tried my best to recover my partitions but failed. I format it and run disk tool even seagate HDD tools but nothing happens. Its working properly, no damage, all scans are ok, than why its showing only 40 Gbytes. Pls answer or tell me what I have to do.]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_17</link>
		<pubDate>Sun, 07 Jun 2009 21:16:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Can the HD Doctor for Seagate connect with Momentus ... (James)]]></title>
		<description><![CDATA[Can the HD Doctor for Seagate connect with Momentus 7200.2 SATA Hard Drive?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_18</link>
		<pubDate>Mon, 06 Jul 2009 22:44:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I have a TONKA15 that shows this when I ... (Craig Peterson)]]></title>
		<description><![CDATA[I have a TONKA15 that shows this when I do a CHK FW:

T>
:6000000000000000  AX`'  ""1629E-163CB
SRAM Ovly = Diag
(

*******(

************* Cert Log Cyls inadequate. 0005 more cyls required
INVALID Cert Disk Code - ROM Resident Revision Required: 3.BQH 
Command Inactive - No VALID Cert Code Detected

T>Age=60 Type=00 MxCyl=1F061 MxHd=0 MxSct=000 BSz=008M TCode=00000000 ThermFlts=0000
Pgm=00 Trk=FFFFF(16304:00[17023]).0(0).188(FFF) Zn=0 Err=00 ErCt=0000 Hlth=0000 CHlth=0000 Ready LBA=0000102D
Age=60 Type=00 MxCyl=1F061 MxHd=0 MxSct=000 BSz=008M TCode=00000000 ThermFlts=0000
((INVALID Cert Disk Code - ROM Resident Revision Required: 3.BQH

The PCB is original and tests OK (with another flash IC on another drive).

How do I fix this problem?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_19</link>
		<pubDate>Thu, 16 Jul 2009 07:29:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I am new user. I have a disk seagate ... (JuanDonoso)]]></title>
		<description><![CDATA[I am new user.  
I have a disk seagate 7200.11 1000 Gbytes.  
I have connected it to the hd doctor for seagate, but in the main menu  
he keeps in the screen selection Barracuda 7200.11 the accountant mV   
increasing their value and of there it doesn't pass to the following screen.  
  
Engineer Juan Donoso  
Recovery dates  
Guayaquil Equator]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_20</link>
		<pubDate>Wed, 29 Jul 2009 15:35:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I have a Seagate 7200.11 that would spin up, ... (Craig Peterson)]]></title>
		<description><![CDATA[I have a Seagate 7200.11 that would spin up, attempt to get ready then click at the end and spin down.
After running the standard 7200.11 repair the drive spins up and gets ready.
But now its capacity is seen as 0GB and no sectors are readable.
I have run the repair a number of times but to no effect.
Is there anything else I can do?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_21</link>
		<pubDate>Thu, 30 Jul 2009 04:47:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I have a HTS541680J9SA00 with dead PCB. After replacing ... (Craig Peterson)]]></title>
		<description><![CDATA[I have a HTS541680J9SA00 with dead PCB.
After replacing the PCB with a compatible PCB I ran the NVRAM search.
All went well until trying to use the found and saved NVRAM file to continue the repair.
The program says that the file is an incorrect length and won't use it.
Is there a work around for this?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_22</link>
		<pubDate>Thu, 30 Jul 2009 04:50:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Dear Sir/Madam, What does 'Setup Rrror! FDD not ready ... (Brent Sanderson)]]></title>
		<description><![CDATA[Dear Sir/Madam,

What does 'Setup Rrror! FDD not ready yet,Please try again.'?

Thanks in advance,

Brent]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_23</link>
		<pubDate>Thu, 30 Jul 2009 22:49:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[why i can find a firmware for HHD Doctor ... (dika)]]></title>
		<description><![CDATA[why i can find a firmware for HHD Doctor for maxtor is very difficult...
latest i find is easy
so what can i doing if the firmware is veri difficult?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_24</link>
		<pubDate>Wed, 19 Aug 2009 04:22:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[i am retired and like to get info on ... (gilbert collebert)]]></title>
		<description><![CDATA[i am retired and like to get info on hdd repair.
1)what's the price of your products
2)is there an evaluation or student version or any other source of information regarding hdd repair?
ps i'm living in Belgium
regards]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_25</link>
		<pubDate>Fri, 21 Aug 2009 12:24:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[hi have just got a 2.8g ms-6721 motherboard which ... (bob)]]></title>
		<description><![CDATA[hi have just got a 2.8g ms-6721 motherboard which was running a 20gig seagate st320410a hard drive which is running fine.have tried to swap it with a 80gig wd800bb hard drive but when i turn it on it thinks for a minute then flashes blue whith some sought writing and then just keeps restarting what do you think this could be thanks bob]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_26</link>
		<pubDate>Sun, 06 Sep 2009 13:06:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[sir my harddisk have a boot sector virus which ... (Ritesh)]]></title>
		<description><![CDATA[sir my harddisk have a boot sector virus which is not delete by my avira mbr boot antivirus 
harddisk partition are automatically delete and when i m try to install new windows it will display a message boot virus overrite contineue.
can i back up my data
HD size 80 GB
 ]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_27</link>
		<pubDate>Mon, 07 Sep 2009 07:14:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[i have a hdd wd2500bb-00rda0 250gb my drive got ... (sheraz)]]></title>
		<description><![CDATA[i have a hdd wd2500bb-00rda0 250gb
my drive got infected with virus . i tried lot to remove with diffrent anti viruses. then one i reboot system the is no drive found. then i try reinstalled opratingsystem
but durring instaltion he shows only one unprepared space of 250 gb my all data lost . what shell i have to do ]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_28</link>
		<pubDate>Sun, 13 Sep 2009 14:31:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[if a hdd can not be detected by bios, ... (gagad)]]></title>
		<description><![CDATA[if a hdd can not be detected by bios, can data compass retrive the data inside without hd doctor ?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_29</link>
		<pubDate>Thu, 15 Oct 2009 06:17:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[How much does your training cost? because it was ... (michael)]]></title>
		<description><![CDATA[How much does your training cost? because it was not included here online.

Thanks]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_30</link>
		<pubDate>Sun, 25 Oct 2009 19:46:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[How identify ID and MarK in MemoryStiCK? The SD ... (Roberto Lamim)]]></title>
		<description><![CDATA[How identify ID and MarK in MemoryStiCK?
The SD Flash Doctor run in Windows Vista?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_31</link>
		<pubDate>Fri, 30 Oct 2009 13:37:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I downloaded the salvation HDD Scan and Repair Program ... (Pharris j)]]></title>
		<description><![CDATA[I downloaded the salvation HDD Scan and Repair Program ver 3.0 and put it on a disk to boot up my crashed HDD and It gets to the loading screen then keeps restarting and im not sure why. Is there any way you can help me?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_32</link>
		<pubDate>Thu, 05 Nov 2009 21:44:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[How to depop head for WD HDD royal family? ... (nader thrwat)]]></title>
		<description><![CDATA[How to depop head for WD HDD royal family? 
]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_33</link>
		<pubDate>Thu, 26 Nov 2009 00:02:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[unable to remove "CE Log EC=0 Rtype=36 OV=0 STStatus0 ... (Imran)]]></title>
		<description><![CDATA[unable to remove "CE Log EC=0 Rtype=36 OV=0 STStatus0 " error please advice what to do 
thanks]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_34</link>
		<pubDate>Tue, 15 Dec 2009 14:19:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[how can i change the Rom data if there ... (Fadi)]]></title>
		<description><![CDATA[how can i change the Rom data if there is a ROM chipset in Seagate PCBA change]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_35</link>
		<pubDate>Tue, 22 Dec 2009 09:22:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi i am a new user of data salvation ... (FADI)]]></title>
		<description><![CDATA[Hi i am  a new user of data salvation products i just need the driver of usb in HD doctor for seagate i cant find the driver in DRIVER folder as indicated by you before please i need your help.Is there any specaial connection for that?or what shall i do? thanks anyway ]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_36</link>
		<pubDate>Tue, 22 Dec 2009 12:13:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi i am a new user of data salvation ... (FADI)]]></title>
		<description><![CDATA[Hi i am  a new user of data salvation products i just need the driver of usb in HD doctor for seagate i cant find the driver in DRIVER folder as indicated by you before please i need your help.Is there any specaial connection for that?or what shall i do? thanks anyway ]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_37</link>
		<pubDate>Tue, 22 Dec 2009 12:51:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hello, I am a computer HW Engr and would ... (Javed Khan)]]></title>
		<description><![CDATA[Hello, 
I am a computer HW Engr and would like know about the training courses offered by your organization. I am interested to have complete knowledge and maintenance capability of all kinds of Hard Disk Drives. I would also like to know that whether your training will cover the data recovery (software) and diagnostic tools (hardware)techniques? 
Waiting for your response at your earliest, please.

JAVED KHAN
hashtnagarwal@yahoo.com  ]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_38</link>
		<pubDate>Wed, 23 Dec 2009 06:42:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[how to run selfscan barracuda 7200.7 (FAHAD)]]></title>
		<description><![CDATA[how to run selfscan barracuda 7200.7]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_39</link>
		<pubDate>Tue, 19 Jan 2010 14:20:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I have a maxtor 2f040j and the drives shows ... (Marius)]]></title>
		<description><![CDATA[I have a maxtor 2f040j and the drives shows as maxtor ares C64K. Could you give some help fixing and getting the data using HD Doctor for maxtor please.]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_40</link>
		<pubDate>Fri, 29 Jan 2010 11:31:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[how we can depope of baracoda 7200.7 160Gb. i ... (muhammad asim)]]></title>
		<description><![CDATA[how we can depope of baracoda 7200.7 160Gb. i wana depop the primar 0 head.  ]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_41</link>
		<pubDate>Sun, 07 Mar 2010 04:10:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[i have a WD caviar 160 GB, my HD ... (tK)]]></title>
		<description><![CDATA[i have a WD caviar 160 GB, my HD is not detectable at all whenever i open HD doctor it says device not ready please check the connection..]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_42</link>
		<pubDate>Thu, 11 Mar 2010 23:27:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Can your tools unlock hitachi HDD's?  (Mark Southby)]]></title>
		<description><![CDATA[Can your tools unlock hitachi HDD's?
]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_43</link>
		<pubDate>Thu, 25 Mar 2010 22:16:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[i have a 160GB Maxtor which cannot be seen ... (Ambrose)]]></title>
		<description><![CDATA[i have a 160GB Maxtor which cannot be seen in disk Management but is only seen in BIOS.Advise

secondly,give me more details about your training packages,duration,charges and whether accommodation facilities are available.]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_44</link>
		<pubDate>Thu, 06 May 2010 22:43:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Where can I download the data compass manual, the ... (Victor Alba)]]></title>
		<description><![CDATA[Where can I download the data compass manual, the one I have in the cd is damage (pdf file).]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_45</link>
		<pubDate>Mon, 10 May 2010 22:23:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I would like to know the value of the ... (Natalia Valverde)]]></title>
		<description><![CDATA[I would like to know the value of the Product Flash Doctor, how to proceed to purchase and if the Product Flash Doctor is avaiable in demo software version. Whether we can make contact in Portuguese.

Graciously.]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_46</link>
		<pubDate>Tue, 11 May 2010 19:29:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I have a wd4000 that makes a clicking sound, ... (Kyle)]]></title>
		<description><![CDATA[I have a wd4000 that makes a clicking sound, can hd doctor fix it?]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_47</link>
		<pubDate>Sat, 22 May 2010 00:36:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[My passport wd 2500 beeped and does not work ... (ilkin)]]></title>
		<description><![CDATA[My passport wd 2500 beeped and does not work Files in inside worry me.can i get them>??
Computer knows only usb the icon does not seem
please help me]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_48</link>
		<pubDate>Tue, 25 May 2010 23:49:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Why does my Maxtor DiamindMax 10, 200GB disk report ... (Stig)]]></title>
		<description><![CDATA[Why does my Maxtor DiamindMax 10, 200GB disk report 85 degrees celsius already at startup? The disk works otherwise fine and is only warm to the touch even after several hours of use.]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_49</link>
		<pubDate>Thu, 27 May 2010 19:32:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I need a list of the Seagate model types ... (Robert Zandona)]]></title>
		<description><![CDATA[I need a list of the Seagate model types so I know how to identify the drive]]></description>
		<link>http://www.salvationdata.com/faq/index.php?action=open#openq_50</link>
		<pubDate>Fri, 28 May 2010 18:19:00 GMT</pubDate>
	</item>
</channel>
</rss>
