1.Connect the hdd to safe mode.

2.Go to (hdd boot management tab).

3.Load boot-c file from the boot-c folder in the installation directory.

4.Load rom.

5.load all mods.

6.Hdd reset.

7.After hdd status is ready.

8.Go to (load hdd management tab)

9.Click on (load from the hdd)

10.Then do to (hdd boot management tab)

11.Click on (save A-boot) to save hdd own sa-c file.

12.Then power off and again on.

13.Load the sa-a boot file which u save from the hdd.

14.Load rom

15.Load all mods.

16.Hdd reset.
After hdd status becomes ready.

17.Go to (hdd load management tab)

18.Click on (load from the hdd)

19.Go to (selfscan tab)

20.Click on(view flow)

21.Click on (optimization)

22.Click on (selfscan in ram)

23.Selfscan is started.

24.At id 89 the selfscan stop.

25.Then power off and turn the jumper to master mode and turn on the power .the selfscan go on to run.

EXAMPLE:

• Maxtor 6Y series hdd
• 6Y250M6 hdd

Click here to see the tutorial video.